12 May 2020 – Rain/Snow and 40 degrees!
In between calving and bull virility testing, Dave and I have been working to get things going here on the Holler. A few posts ago I mentioned that our redneck disk broke down and was unsalvageable. Interestingly enough, the man that removed all the rocks from our barnyard had a contact in Rapid City that deals in used farm equipment. Dave contacted him and he had a used 12 foot tandem disk that he thought might work for us.
Dave went to look at the disk and liked it, however it was too big to fit on a trailer, and while it could be towed behind a tractor or truck, it needed new tires. The guy put different tires on it and Dave brought it home. This was quite an adventure for rancher Dave. The disk, as mentioned before, is 12 feet wide (as advertised, but more on this later) and that is quite a wide load to pull up the mountain. Additionally, as the disk hooked onto a drawbar on the back of the truck, it was not made for this type of travel. At about 20mph it would start violently vibrating back and forth. Traffic was backing up behind Dave as he slowly crawled up the hill with the wide disk in tow. The road from Rapid is also pretty twisty and narrow in some places so it took him about four hours to get home. When he turned to come into Stagecoach Springs, he questioned whether the disk would fit through the entrance to our road.
I drove up in the Mule to meet him and brought the tape measure. We realized our entrance is exactly 12 feet 5 inches wide at the narrowest point. The “12 Foot Disk” measured about 13 feet, 6 inches. Rats!
Fortunately, there were a couple of options open to us. We considered bringing the tractor up to the entrance and lifting the disk over the fences. We also realized a neighbor to the east of us has a wide gate entrance to her pasture, and we have a 16 foot gate between our properties. We decided to go with this route and after contacting her, she said that would be no problem at all. Dave drove the disk 2 miles east to her property and through her gate. Then he proceeded cross-country, over rocks and through trees and up the hill to the point where her pasture finally meets the gate in ours. The terrain was pretty rough and about half way through his journey we decided it would be better to get the tractor and pull the disk rather than put all that wear and tear on the truck.
So about 6 hours after leaving rapid city, we finally got the new/old disk onto the Holler. We were really hoping it would work as it seems this is its new permanent home, unless we decide to widen the entrance to the road.
The next day, Dave put the hydraulic cylinder on the disk and there were several problems with the fittings. Fortunately, Dave knows a great welder in Custer so he took the required parts to him, which he found a fix for on the spot. A few hours later we had the disk hooked up and running and Dave was able to complete disking our southern field.
The disk worked so well, we decided to rip up some more pasture in the northern fields. Dave completed all the disking, I did the planting and we split the harrowing duties. We finished the hay crop work on Saturday, just in time for some snow and rain on Monday! Hooray!
We still have one field to work, but the cows are in that pasture until the 1st of June. Once we move them elsewhere, we will plant a crop in that field that we can harvest later. Our goal is to produce enough hay to feed the herd all winter. We were successful this year, and while we are still feeding a bale or two a day because of the cold temperatures, we have enough hay to last through the 2nd of June. The calves are grazing more and more and we are cutting back on the feeding, but when there is snow, we like to make sure they have enough to eat. I really hope we aren’t feeding in June! The point is our hay crop mostly determines the size of our herd, but we do have options to buy hay if we don’t harvest enough of our own. We do like the idea of being independent, though, and are doing all we can to make use of this land.
We are also trying to get the garden and the lawn up to speed. Since construction four years ago, there are parts of the yard that have not recovered. We have planted grass seed, but it has only taken to some places, and some spots are so rocky and sandy it doesn’t appear we will ever have grass there. Dave has been getting some good soil out of one of the ditches and putting it on the bare spots in what should be the lawn. Hopefully this will lead to some growth. Also, he used the ditch dirt to cover up the rocky barnyard cliffs. We are going to put out some grass seed and wildflower seeds on this bank.
I have harvested some asparagus out of the garden, but it doesn’t appear to be doing so good after the freezing temps we have had for the last few days. It will get warm again, though, (right?) so hopefully we can get the vegetable garden up and running. The greenhouse has been good for some seeds, but I can’t transplant anything out in the snow, so hopefully the beets, peppers, and lettuce can hang on a little longer in there.
The weeks are just flying by. Dave and I were having a glass of wine on the porch this weekend and he said, “I can’t believe we are only about six weeks away from the summer solstice, and then the days will start getting shorter again.” I said, “I wish you hadn’t said that, Dave.” But he is right, and spring and summer are the busiest times for us, so that does make the calendar seem like it is turning quickly. It’s a good thing though, to go to bed tired knowing that you got some good work done during the day, and to wake up in the morning knowing that you still have a lot to do.